DISCLAIMER:
I do not encourage or advise anyone watching this video to modify their firearm. I am NOT a professional gunsmith! If you are not 100% confident in your ability to modify gun components, DO NOT even attempt it! A small change in the angle of the front of a trigger or hammer can result in a completely unsafe firearm! When in doubt, always seek out a professional gunsmith!

I go through every single part of the new Springfield DS Prodigy. This video is extremely long and comprehensive. Time stamps for individual components, issues, and improvements can be found below. Hopefully this video will be helpful for people with this gun who may be having reliability issues or want to increase performance. What is shown in this video applies to both the 5/" and 4.25/" guns.

Quick guide to the biggest problems: The extractor (skip to 12:55), dirt in the firing pin channel (skip to 16:42), disconnector sticking (fixed by work at 11:18, 28:14 and 39:33), magazine problems (skip to 40:56).

The most helpful videos I found on this gun and platform were from @AtlasGunworks, @108Performance and @nobodytraining.

Great video from @RobbieWheaton on magazine reliability!
https://www.youtube.com/watch?vZG_WNaqJgsY

Link to the video of the 10-8 performance test fire protocol:
https://www.youtube.com/watch?vv5f3mtxPAEM&t17s

Link to Atlas Gunworks video on fine-tuning the trigger spring:
https://www.youtube.com/watch?vOARYyFlbI3Y

Link to the great video from @ChambersCustom:
https://www.youtube.com/watch?vQI__QqBPow8

00:00 Introduction
02:01 Should you buy this gun?
03:18 Out-of-the-box feeling and triggers
06:09 Lubricants and ammunition for the first test
06:45 First range tests
08:22 Vibratory finishing
09:56 Broken face
10:54 Firing pin retaining plate
11:18 Polishing the bottom of the slider (for separating function)
12:06 Divider bag
12:55 Problems with the extractor
15:31 Barrel and feed ramp
15:44 Firing pin and spring
16:58 Return spring
17:24 Shock Buff
18:08 Grip module and trigger
20:33 Mainspring housing and components
21:47 Publication of the magazine
23:37 Frame
24:20 Frying
25:47 Hammer and brace
27:30 Sear and hammer pins
28:14 Circuit breaker
30:48 Leaf spring for sear
33:24 Grip security
35:26 Piston and piston tube
35:54 Thumb safety
39:01 Leaf spring adjustment for trigger weight and separation function
40:56 Magazine issues
44:12 Feeling and trigger after tuning, safety checks
46:23 Shots from the shooting range after fine-tuning
47:02 Which parts would I replace?
48:55 Conclusion

Please take the opportunity to connect with your friends and family and share this video with them if you find it useful.