Resin printers create amazing prints, but the uncured liquid resin is a nuisance and can get everywhere. Here are some of my tips to contain the mess and keep things safe. This is my SLA resin management guide or resin handling guide. Most of the things mentioned here are pretty inexpensive. In the $5 to $15 range.

As for my mask. I know it's probably not good enough, but it's easy to wear and better than nothing. Plus, the fumes are very minimal thanks to the ventilation system I added. But feel free to leave your suggestions in the comments.

Here you can download all the material from the video. These are affiliate links that support my channel.

Rubber mats – the ones I use in this video are no longer available on Amazon. But these look better because they are very large: https://amzn.to/3pmhfws

Or these, which are more similar to the ones in the video: https://amzn.to/3eAqcw0

An alternative to these mats are these food bowls, which are rigid and therefore can absorb liquids and spills a little better… https://amzn.to/3lo3bQK

Metal funnel – https://amzn.to/39ZU56y
IPA – https://amzn.to/2T0uFzS
Spray bottles – https://amzn.to/2T2q7t2
Nitrile gloves – https://amzn.to/2Tm6T0c
My mask – https://amzn.to/3cgvWL5
Tea strainer for recycling IPA – https://amzn.to/3c7ZJFr

And this is my favorite resin (not shown in this video): https://amzn.to/3kln4qe

Please take the opportunity to connect with your friends and family and share this video with them if you find it useful.