In this video I go over everything you need to know to get started with 3D resin printing. I discuss the technology, choosing a printer, choosing our resin, safety, cutting, printing, and cleaning.

Thank you to all my subscribers for your support. Commenting on the videos is one of the best things you can do to help my channel grow, so thank you again for all your support.

This video features products and below you will find affiliate links. This means that I will receive a small commission if you purchase through one of these links. But these small commissions help keep this channel running, so please use them and share. Thanks!

This video was sponsored by Nova3D and they provided the Elphin 2 printer shown in this video.
The printer is available here: https://amzn.to/2PRfj1E

BUT this printer seems to be discontinued. I would check out this one instead: https://amzn.to/309s7pJ

This video is also sponsored by Yousu and they provided the resin.
You can buy the resin here: https://amzn.to/2PQspfz

More affiliate links to get all the content you see in the video. Using these links supports my channel, so it really helps me if you also use these links when sharing these articles.

This is the great deal for the plastic wrap. Note that all other roll sizes are more like 20-30. But this one is only 5: https://amzn.to/3dxTT1M

Plastic Food Trays – 12 x 12 x 16: https://amzn.to/2OnNMVe
(There are some 10×14 models that are cheaper. But the larger ones are better suited for 3D printing.)

The rubber mats as seen in the resin handling video – https://amzn.to/3pmhfws
(I usually use both and place the rubber mats on the feeding trays)

Metal funnel – https://amzn.to/39ZU56y
IPA – https://amzn.to/2T0uFzS
Spray bottles – https://amzn.to/2T2q7t2
Nitrile gloves – https://amzn.to/2Tm6T0c
My mask – https://amzn.to/3cgvWL5

UV lamp – https://amzn.to/3fMfDts

And this is the other resin I use, Siraya Tech: https://amzn.to/3kln4qe

Here is my favorite Atari hat: https://amzn.to/3mhoW5Z
Here is the hat I'm wearing in this video: https://amzn.to/3fLdHkT

These are not the exact ones from the video, but they look pretty good:
Metal scraper: https://amzn.to/3fIenYq
Safety glasses: https://amzn.to/39HbZ08

I would also like to thank Formlabs for allowing me to use some of their footage for this video. For more information about Formlabs printers, see here: https://formlabs.com/3d-printers/form-3/

Please take the opportunity to connect with your friends and family and share this video with them if you find it useful.